1 - Filtration - SunSpot

1 - Filtration - 2 - Testing Water - 3 - Chemicals - Winterisation - Problem Chart - Pool Safety - Glossary - Useful Information

1 - Filtration

Step 1: Filtration & Circulation


Your pool will probably be supplied with a filtration system, usually cartridge or sand.  When you run the pump the water is taken from the pool circulated through the filter and then returned to the pool.  The filter’s job is to collect small particles, debris, insects and dead algae thus removing them from the water keeping it clear.

Handy Tips


Tip 1 Run your filtration / circulation system every day for enough time to turn the complete capacity of the pool over at least once and ideally 1.5 times.  For most ‘splasher’ pools this is typically 4-hours per day.
Tip 2 After prolonged or excessive pool use on ‘balmy summer days’ (we wish!!), consider extending the filtration / circulation running time.
Tip 3 Regular cleaning of your filter cartridge or sand is a must to ensure it continues to perform effectively.  Filter sand should be chemically cleaned annually using Sunspot Filter Cleaner.  Cartridge elements will need to be cleaned more frequently, about every 4 – 6 weeks. NB: If you have a cartridge filter, it is good practice to obtain a spare cartridge so while you are cleaning one, the other can be in use.